CGXSW - F-151-EPOXY-POLYAMIDE PAINT, HAZE GRAY #26270
- MSDS: CGXSW
- Manufacturer: PRO LINE PAINT CO
- Product Name: F-151-EPOXY-POLYAMIDE PAINT, HAZE GRAY #26270
- National Stock Number: 8010-01-350-4741
Product Identification
Product ID:F-151-EPOXY-POLYAMIDE PAINT, HAZE GRAY #26270
MSDS Date:02/05/1996
FSC:8010
NIIN:01-350-4741
Kit Part:Y
MSDS Number: CGXSW
Responsible Party
SAN DIEGO, CA 92113-3613
US
Emergency Phone: 800-535-5053
Info Phone: 619-231-2313 OR 232-8968
Preparer: E. SOETERIK
Cage: 9D157
Contractor
Telephone: 619-231-2313; 619-232-8968
Cage: 9D157
Ingredients
HARDENER-AMIDO AMIDE
CAS: 112-57-2
RTECS: KH8585000
Fraction By Weight: .25-1.0%
RESIN HARDENER-POLYAMIDE
RESIN SOLUTION (SARA 313) (CERCLA)
CAS: 71-36-3
RTECS: EO1400000
Fraction By Weight: 10-14.0%
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
RHEOLOGICAL ADDITIVE
Fraction By Weight: 0.1-1.0%
MAGNESIUM SILICATE HYDRATE
CAS: 1480-19-6
Fraction By Weight: 20-25.0%
N-BUTYL ALCOHOL (SARA 313) (CERCLA)
CAS: 71-36-3
RTECS: EO1400000
Fraction By Weight: 12-14.0%
OSHA PEL 100 PPM
ACGIH TLV: 50 PPM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
TITANIUM DIOXIDE
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 3-6.0%
OSHA PEL 15 MG/M3
ACGIH TLV: 10 MG/M3
BLACK IRON OXIDE
CAS: 1317-61-9
Fraction By Weight: 2-3.0%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE: REDNESS. SKIN: BURNING SENSATION,
RASH, INFLAMMATION, PINKISH. INHAL: COUGHING, SHORTNESS OF BREATH,
DIZZY, HEADACHE, CONVULSIONS. INGEST: DIARRHEA, STOMACH CRAMPS.
Medical Cond Aggravated by Exposure:ASTHMA, EMPHYSEMA & OTHER
RESPIRATORY DISEASES.
First Aid
First Aid:EYE: FLUSH W/WATER. SKIN: WASH W/WATER, THEN W/SOAP & WATER.
INHAL: REMOVE TO FRESH AIR. ARTIF RESP IF NEEDED. INGEST: CALL A
DR. IN ALL CASES, GET IMMED MED AID.
Fire Fighting
Flash Point Method:SCC
Flash Point:101F,38C
Lower Limits:1.4
Upper Limits:11.2
Extinguishing Media:WATER SPRAY, CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:BLANKET FLAME W/EXTINGUISHING MEDIA. USE
PROPER PROTECTION & EQUIPMENT INCLUDING SCBA.
Unusual Fire/Explosion Hazard:KEEP MATERIAL AWAY FROM IGNIT SOURCES.
EXPLOSIVE WHEN HEATED. STAY A SAFE DISTANCE FROM FIRE WHEN
EXTINGUISHING.
Accidental Release
Spill Release Procedures:REMOVE ALL IGNIT SOURCES. VENT AREA. PROTECT
CLEAN-UP MAN W/A540 3M CORP. NIOSH APPROVED RESPIRATOR, GOGGLES,
RUBBER GLOVES. (NOTE RESPIRATORY PROTECTION SECTION).
Handling
Handling and Storage Precautions:PROTECT AGAINST PHYSICAL DAMAGE TO
CONTAINER & SPILLAGE. STORE IN A COOL, WELL VENTED AREA W/SPRINKLER
SYSTEM. KEEP FROM HEAT. POST NO SMOKING SIGNS.
Other Precautions:TRAIN EMPLOYEE ON ALL SPECIAL HANDLING PROCEDURES
BEFORE THEY WORK WITH THIS PRODUCT.
Exposure Controls
Respiratory Protection:USE DUST/MIST RESPIRATOR (HIGH EFFICIENCY
CARTRIDGE ADVISED). IF SPRAYING/SANDING, USE ORGANIC VAPOR
CARTRIDGE RESP IF TLV FOR SOLVENT COMPONENTS EXCEEDED E.G. 8540 3M
CORP. RESPIRATOR NIOSH APPROVED, IN CONFINED AREAS, WEAR AIR-FED
HOOD.
Ventilation:USE LOCAL EXHAUST WHEN APPLYING THIS PAINT IN CONFINED
AREAS.
Protective Gloves:RUBBER
Eye Protection:GOGGLES W/SIDE SHIELDS
Other Protective Equipment:USE PROTECTIVE CLOTHES. PROVIDE EMERGENCY
SHOWERS & EYEWASH STATIONS.
Work Hygienic Practices:CHANGE CONTAM CLOTHES IMMED.
Supplemental Safety and Health
NK
Chemical Properties
Boiling Pt:B.P. Text:244F,118C
Melt/Freeze Pt:M.P/F.P Text:128F,53C
Vapor Pres:4.4 @ 60F
Vapor Density:2.1 AIR =1
Spec Gravity:1.3
VOC Pounds/Gallon:340
Evaporation Rate & Reference:.43 (BUAC = 1)
Solubility in Water:POOR
Appearance and Odor:TYPICAL PAINT APPEARANCE W/STRONG SOLVENT ODOR,
TYPICAL OF BUTANOL.
Stability
Stability Indicator/Materials to Avoid:YES
WHEN A AND B ARE MIXED, KEEP AWAY FROM HEAT. HEAT WILL CREATE A RAPID
CHEMICAL REACTION. EMITE HEAT.
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME. DONT ALLOW VAPOR
TO ACCUMULATE.
Hazardous Decomposition Products:COMBUSTIBLE FUMES MAY ACCUMULATE IN
CONFINED AREAS, AND SPARKS AND OPEN FLAMES MAY IGNITE IT.
Disposal
Waste Disposal Methods:USE ANY KIND OF ABSORBENT TO ABSORB SPILLED
MATERIAL. PUT IN METAL CONTAINER MARKED, DO NOT USE THIS MATERIAL.
DISPOSE OF LEGALLY IN ACCORDANCE W/FEDERAL, STATE AND LOCAL
REGULATIONS.
Other Information
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.