CGXSW - F-151-EPOXY-POLYAMIDE PAINT, HAZE GRAY #26270

  • MSDS: CGXSW
  • Manufacturer: PRO LINE PAINT CO
  • Product Name: F-151-EPOXY-POLYAMIDE PAINT, HAZE GRAY #26270
  • National Stock Number: 8010-01-350-4741
Product Identification

Product ID:F-151-EPOXY-POLYAMIDE PAINT, HAZE GRAY #26270
MSDS Date:02/05/1996
FSC:8010
NIIN:01-350-4741
Kit Part:Y
MSDS Number: CGXSW

Responsible Party
PRO-LINE PAINT CO
2646 MAIN STREET
SAN DIEGO, CA 92113-3613
US

Emergency Phone: 800-535-5053

Info Phone: 619-231-2313 OR 232-8968

Preparer: E. SOETERIK

Cage: 9D157

Contractor
PRO-LINE PAINT CO
SAN DIEGO, CA 92113-3697 US

Telephone: 619-231-2313; 619-232-8968

Cage: 9D157

Ingredients

HARDENER-AMIDO AMIDE

CAS: 112-57-2

RTECS: KH8585000

Fraction By Weight: .25-1.0%


RESIN HARDENER-POLYAMIDE


RESIN SOLUTION (SARA 313) (CERCLA)

CAS: 71-36-3

RTECS: EO1400000

Fraction By Weight: 10-14.0%

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


RHEOLOGICAL ADDITIVE

Fraction By Weight: 0.1-1.0%


MAGNESIUM SILICATE HYDRATE

CAS: 1480-19-6

Fraction By Weight: 20-25.0%


N-BUTYL ALCOHOL (SARA 313) (CERCLA)

CAS: 71-36-3

RTECS: EO1400000

Fraction By Weight: 12-14.0%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 3-6.0%

OSHA PEL 15 MG/M3

ACGIH TLV: 10 MG/M3


BLACK IRON OXIDE

CAS: 1317-61-9

Fraction By Weight: 2-3.0%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE: REDNESS. SKIN: BURNING SENSATION,
RASH, INFLAMMATION, PINKISH. INHAL: COUGHING, SHORTNESS OF BREATH,
DIZZY, HEADACHE, CONVULSIONS. INGEST: DIARRHEA, STOMACH CRAMPS.
Medical Cond Aggravated by Exposure:ASTHMA, EMPHYSEMA & OTHER
RESPIRATORY DISEASES.

First Aid

First Aid:EYE: FLUSH W/WATER. SKIN: WASH W/WATER, THEN W/SOAP & WATER.
INHAL: REMOVE TO FRESH AIR. ARTIF RESP IF NEEDED. INGEST: CALL A
DR. IN ALL CASES, GET IMMED MED AID.

Fire Fighting

Flash Point Method:SCC
Flash Point:101F,38C
Lower Limits:1.4
Upper Limits:11.2
Extinguishing Media:WATER SPRAY, CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:BLANKET FLAME W/EXTINGUISHING MEDIA. USE
PROPER PROTECTION & EQUIPMENT INCLUDING SCBA.
Unusual Fire/Explosion Hazard:KEEP MATERIAL AWAY FROM IGNIT SOURCES.
EXPLOSIVE WHEN HEATED. STAY A SAFE DISTANCE FROM FIRE WHEN
EXTINGUISHING.

Accidental Release

Spill Release Procedures:REMOVE ALL IGNIT SOURCES. VENT AREA. PROTECT
CLEAN-UP MAN W/A540 3M CORP. NIOSH APPROVED RESPIRATOR, GOGGLES,
RUBBER GLOVES. (NOTE RESPIRATORY PROTECTION SECTION).

Handling

Handling and Storage Precautions:PROTECT AGAINST PHYSICAL DAMAGE TO
CONTAINER & SPILLAGE. STORE IN A COOL, WELL VENTED AREA W/SPRINKLER
SYSTEM. KEEP FROM HEAT. POST NO SMOKING SIGNS.
Other Precautions:TRAIN EMPLOYEE ON ALL SPECIAL HANDLING PROCEDURES
BEFORE THEY WORK WITH THIS PRODUCT.

Exposure Controls

Respiratory Protection:USE DUST/MIST RESPIRATOR (HIGH EFFICIENCY
CARTRIDGE ADVISED). IF SPRAYING/SANDING, USE ORGANIC VAPOR
CARTRIDGE RESP IF TLV FOR SOLVENT COMPONENTS EXCEEDED E.G. 8540 3M
CORP. RESPIRATOR NIOSH APPROVED, IN CONFINED AREAS, WEAR AIR-FED
HOOD.
Ventilation:USE LOCAL EXHAUST WHEN APPLYING THIS PAINT IN CONFINED
AREAS.
Protective Gloves:RUBBER
Eye Protection:GOGGLES W/SIDE SHIELDS
Other Protective Equipment:USE PROTECTIVE CLOTHES. PROVIDE EMERGENCY
SHOWERS & EYEWASH STATIONS.
Work Hygienic Practices:CHANGE CONTAM CLOTHES IMMED.
Supplemental Safety and Health
NK

Chemical Properties

Boiling Pt:B.P. Text:244F,118C
Melt/Freeze Pt:M.P/F.P Text:128F,53C
Vapor Pres:4.4 @ 60F
Vapor Density:2.1 AIR =1
Spec Gravity:1.3
VOC Pounds/Gallon:340
Evaporation Rate & Reference:.43 (BUAC = 1)
Solubility in Water:POOR
Appearance and Odor:TYPICAL PAINT APPEARANCE W/STRONG SOLVENT ODOR,
TYPICAL OF BUTANOL.

Stability

Stability Indicator/Materials to Avoid:YES
WHEN A AND B ARE MIXED, KEEP AWAY FROM HEAT. HEAT WILL CREATE A RAPID
CHEMICAL REACTION. EMITE HEAT.
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME. DONT ALLOW VAPOR
TO ACCUMULATE.
Hazardous Decomposition Products:COMBUSTIBLE FUMES MAY ACCUMULATE IN
CONFINED AREAS, AND SPARKS AND OPEN FLAMES MAY IGNITE IT.

Disposal

Waste Disposal Methods:USE ANY KIND OF ABSORBENT TO ABSORB SPILLED
MATERIAL. PUT IN METAL CONTAINER MARKED, DO NOT USE THIS MATERIAL.
DISPOSE OF LEGALLY IN ACCORDANCE W/FEDERAL, STATE AND LOCAL
REGULATIONS.

Other Information

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.